Newell Polarizing Film 11 x 19 cm for Rangha Max Light

Description

The Newell polarizing film will help you more effectively reduce glare and enhance the visibility of colors, textures, and fine details on photographed surfaces. The 11 x 19 cm sheet has been precisely fitted to the rectangular LED panel of the Newell Rangha Max light, eliminating the need for manual trimming. When combined with a CPL filter mounted in front of your camera or smartphone lens, it enables the use of cross-polarization techniques. It is ideal for photographing tattoos, products, makeup, artwork, and other surfaces where unwanted reflections occur. The 0° mark makes it easy to maintain a consistent orientation of the film across multiple lights, while the single-sided adhesive layer simplifies mounting on the diffuser. The product is covered by Newell’s 40-month protection program.

Main Product Features

polarizing film to help reduce light reflections
sheet perfectly tailored to the Newell Rangha Max LED light
dimensions 11 x 19 cm – no self-trimming required
helps reduce glare and better highlight details
ideal for photographing tattoos and beauty treatment results
great for product photography and macro photography
makes documenting paintings, graphics, and artwork easier
helps better show skin texture, plants, and small objects
0° mark facilitating consistent alignment across multiple lights
single-sided adhesive layer for easy mounting
works with a CPL filter mounted on the lens
enables the use of cross-polarization technique
can be cut to any selected shape
IPS-type film made from PVA material
thickness of 0.15 mm
product covered by Newell’s 40-month protection program

What is polarizing film used for?

Light reflections appearing on skin, glass, and plastic can restrict the visibility of colors, contours, textures, and fine details of the subject. The Newell polarizing film allows you to effectively solve this problem. Placed in front of the light source, it properly aligns the emitted light, enabling a polarizing filter mounted on the camera or phone lens to reduce visible reflections more effectively. As a result, photos and recordings become clearer, and the photographed surface is better visible despite its gloss.

Clear tattoo photos without excessive shine

The Newell polarizing film was designed, among other things, with tattoo photography in mind. In combination with a CPL filter, it helps reduce glare appearing on the skin as well as the shine from petroleum jelly, creams, and post-treatment preparations. Thanks to this, contours, colors, tonal transitions, and subtle details of the completed design are much clearer in the photo. It is a practical solution for tattoo artists preparing materials for portfolios, social media, or work documentation. The film can be used both when shooting with a camera and with a smartphone equipped with a suitable polarizing filter.

Not just for tattoo photography

The Newell polarizing film will perform well wherever reflections make it difficult to showcase color, texture, or fine details. It can be used in product photography, macro photography, documenting paintings and other artwork, as well as photographing skin, makeup, plants, and the effects of cosmetic procedures. In combination with a CPL filter, it also helps better control reflections appearing on glass, plastics, and lacquered surfaces.

0° mark – consistent alignment of multiple lights

On the protective layer of the Newell polarizing film, you will find a 0° mark to help you with proper mounting. This is especially important when using multiple lights. To maintain the same polarization axis for all light sources, each film sheet should be attached in identical orientation. Before removing the protective backing, check the position of the 0° mark and set it identically across all lights. As a result, a single CPL filter on your lens will make it easier to achieve an even effect across the entire frame.

Perfect fit for the Newell Rangha Max light

The 11 x 19 cm film has been perfectly matched to the shape of the rectangular LED panel of the Newell Rangha Max light. As a result, it does not require self-measuring or cutting out the sheet. The appropriate size facilitates uniform coverage of the diffuser surface and reduces the risk of leaving gaps through which light could pass unpolarized. The pre-cut sheet accelerates mounting, allowing you to prepare your setup for photos or videos faster.

How to apply the polarizing film to the Newell Rangha Max light?

Mounting the Newell polarizing film is quick and easy. Here is how to apply it properly to the light:

Clean the diffuser surface – thoroughly clean and dry the surface of the light before installation.
Check the 0° mark – pay attention to the marking on the protective backing layer. If using multiple lights, position all films in the same orientation.
Test the film position – before removing the protective backing, you can temporarily attach the film to the light using tape. The actual adhesive layer is intended for single mounting, so after peeling off the film, re-attaching it evenly may not be possible. This test allows you to check the position, polarization direction, and lighting effect with one or more lamps in advance.
Remove the protective backing layer – peel off the protective film, turn the sheet around, and carefully apply it to the diffuser with the adhesive-coated side down.
Apply the film gradually – start from one side and gently smooth out the material from the center toward the edges. This makes it easier to avoid air bubbles, creases, and uneven placement.
Do not stretch or bend the film – exercise caution during mounting so as not to deform the thin sheet.
Secure the edges with tape – finally, it is recommended to reinforce the bond along the edges with adhesive tape. This reduces the risk of the film peeling off under high light temperatures and helps eliminate light leaks around the edges.

How to correctly use the Newell polarizing film?

Attach the Newell polarizing film to the light’s diffuser so that all light falling on the photographed object passes through its surface. Do not stick it directly onto bare LED diodes and do not cover ventilation openings or other cooling components. Next, mount a polarizing filter onto your camera or phone lens. After turning on the lighting, slowly rotate the filter while observing the image on your screen to find the setting that best reduces glare.

Not only for Newell Rangha Max

Although the presented sheet was designed specifically for the Rangha Max model, if necessary, you can carefully trim it to a different shape or size. If you use other Newell lights, you can also choose pre-cut polarizing film variants tailored to specific devices. This is a more convenient solution that eliminates the need for manual trimming.

Newell polarizing films tailored to the following light models are available for purchase:

Newell Air Artha XL – Ø 41 cm,
Newell Air Artha Max XL – Ø 56 cm,
Newell Air 1100 – 23.5 x 34.5 cm,
Newell Rangha – 7 x 14 cm,
Newell Rangha Max – 11 x 19 cm,
Newell Rangha Max XL – 17 x 27 cm,
Newell Arya – 7.5 x 14.5 cm.

Stable attachment for longer

The Newell polarizing film features a single-sided adhesive layer that facilitates initial positioning on the diffuser. High operating temperatures when running the light at maximum power can affect the durability of the bond; therefore, securing the edges with adhesive tape is recommended. This solution helps prevent the film from peeling off during work while also reducing light spill at the edges, especially if it was not applied perfectly straight.

Remember exposure correction

Polarizing film and CPL filters reduce the amount of light reaching the camera or smartphone sensor. This is a natural effect of polarizers. Depending on conditions, you may need to increase light power, open the aperture, use a longer shutter speed, or raise the ISO sensitivity. In return, you gain greater control over reflections and a clearer image of the photographed surface, revealing color, texture, and fine details much better.

40 months of support

Choose quality and experience. Newell is a brand present on the market since 2009, specializing in consumer electronics and photographic accessories. The Newell polarizing film 11 x 19 cm for the Rangha Max light comes with an extended 40-month protection program. This gives you peace of mind that in case of any product issues, you will receive proper support.